Azqa F Butt
Chemically processed CdTe thin films for potential applications in solar cells - Effect of Cu doping.
Butt, Azqa F; Azhar, M; Yousaf, Hassan; Batoo, K M; Khan, Dilbar; Noman, M; Chaudhry, Mujeeb U; Naseem, Shahzad; Riaz, Saira
Authors
M Azhar
Hassan Yousaf
K M Batoo
Dilbar Khan
M Noman
Dr Mujeeb Chaudhry mujeeb.u.chaudhry@durham.ac.uk
Associate Professor
Shahzad Naseem
Saira Riaz
Abstract
Thin films of cadmium telluride (CdTe) have attained the attention of researchers due to the potential application in solar cells. However, cost-effective fabrication of solar cells based on thin films along with remarkable efficiency and control over optical properties is still a challenging task. This study presents an analysis of the structural, optical and electrical properties of undoped and Cu-doped CdTe thin films fabricated on ITO coated glass substrates using an electrodeposition process with a focus on practical applications. Electrolytes of cadmium (Cd), tellurium (Te) and copper (Cu) are prepared with a low molarity of 0.1 M. Thin films are deposited by keeping current density in the range of 0.12-0.3 mA/cm . Copper doping is varied (2-10 wt%) for the optimized sample. X-ray diffraction crystallography indicates that both undoped CdTe and Cu-doped CdTe films crystallize into a dominant hexagonal lattice. Direct energy band gap is observed for both undoped and doped conditions. The study revealed a drop in the optical band gap energy to ∼1.46 eV with the increase in doping (Cu) concentration from 2 to 10 wt%. Increase in mobility and conductivity is observed with the increase in current density of the deposited undoped CdTe thin films. Whereas, Cu doping of 6 wt% produced thin films with acceptable mobility and conductivity for the doped samples. Furthermore, photoluminescence (PL) spectroscopy unveiled a multitude of emission peaks encompassing the visible spectrum, arising from the combination of electrons and holes through both direct and indirect recombination processes. Findings of this study suggest that chemically produced CdTe thin films would be suitable for use as low-cost applications pertaining to solar cells. [Abstract copyright: © 2024 The Authors.]
Citation
Butt, A. F., Azhar, M., Yousaf, H., Batoo, K. M., Khan, D., Noman, M., …Riaz, S. (2024). Chemically processed CdTe thin films for potential applications in solar cells - Effect of Cu doping. Heliyon, 10(3), Article e24492. https://doi.org/10.1016/j.heliyon.2024.e24492
Journal Article Type | Article |
---|---|
Acceptance Date | Jan 9, 2024 |
Online Publication Date | Jan 12, 2024 |
Publication Date | Feb 15, 2024 |
Deposit Date | Mar 20, 2024 |
Publicly Available Date | Mar 20, 2024 |
Journal | Heliyon |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 10 |
Issue | 3 |
Article Number | e24492 |
DOI | https://doi.org/10.1016/j.heliyon.2024.e24492 |
Keywords | Semiconductors, CdTe, Thin films, Electrodeposition, Optical properties |
Public URL | https://durham-repository.worktribe.com/output/2275957 |
Files
Published Journal Article
(14.4 Mb)
PDF
Licence
http://creativecommons.org/licenses/by-nc-nd/4.0/
Publisher Licence URL
http://creativecommons.org/licenses/by-nc-nd/4.0/
Copyright Statement
© 2024 The Authors. Published by Elsevier Ltd.
Creative Commons Attribution – Non Commercial – No Derivs (CC BY-NC-ND 4.0)
You might also like
Recent Advances in Non‐Ti MXenes: Synthesis, Properties, and Novel Applications
(2024)
Journal Article
Detection of acetone vapours using solution-processed tin oxide thin-film transistors
(2023)
Journal Article