In situ measurements of near-surface hydraulic conductivity in engineered clay slopes
Dixon, N.; Crosby, C.J.; Stirling, R.; Hughes, P.N.; Smethurst, J.; Briggs, K.; Hughes, D.; Gunn, D.; Hobbs, P.; Loveridge, F.; Glendinning, S.; Dijkstra, T.; Hudson, A.
In situ measurements of near-saturated hydraulic conductivity in fine grained soils have been made at six exemplar UK transport earthwork sites: three embankment and three cutting slopes. This paper reports 143 individual measurements and considers the factors that influence the spatial and temporal variability obtained. The test methods employed produce near-saturated conditions and flow under constant head. Full saturation is probably not achieved due to preferential and by-pass flow occurring in these desiccated soils. For an embankment, hydraulic conductivity was found to vary by five orders of magnitude in the slope near-surface (0 to 0.3 metres depth), decreasing by four orders of magnitude between 0.3 and 1.2 metres depth. This extremely high variability is in part due to seasonal temporal changes controlled by soil moisture content, which can account for up to 1.5 orders of magnitude of this variability. Measurements of hydraulic conductivity at a cutting also indicated a four orders of magnitude range of hydraulic conductivity for the near-surface, with strong depth dependency of a two orders of magnitude decrease from 0.2 to 0.6 metres depth. The main factor controlling the large range is found to be spatial variability in the soil macro structure generated by wetting/drying cycle driven desiccation and roots. The measurements of hydraulic conductivity reported in this paper were undertaken to inform and provide a benchmark for the hydraulic parameters used in numerical models of groundwater flow. This is an influential parameter in simulations incorporating the combined weather/vegetation/infiltration/soil interaction mechanisms that are required to assess the performance and deterioration of earthwork slopes in a changing climate.
Dixon, N., Crosby, C., Stirling, R., Hughes, P., Smethurst, J., Briggs, K., …Hudson, A. (2019). In situ measurements of near-surface hydraulic conductivity in engineered clay slopes. Quarterly Journal of Engineering Geology and Hydrogeology, 52(1), 23-135. https://doi.org/10.1144/qjegh2017-059
|Journal Article Type||Article|
|Acceptance Date||Aug 1, 2018|
|Online Publication Date||Aug 31, 2018|
|Publication Date||Feb 28, 2019|
|Deposit Date||Sep 11, 2018|
|Publicly Available Date||Aug 31, 2019|
|Journal||Quarterly Journal of Engineering Geology and Hydrogeology|
|Publisher||The Geological Society|
|Peer Reviewed||Peer Reviewed|
|Related Public URLs||http://qjegh.lyellcollection.org/content/early/2018/08/09/qjegh2017-059|
Accepted Journal Article
Dixon, N., Crosby, C.J., Stirling, R., Hughes, P.N., Smethurst, J., Briggs, K., Hughes, D., Gunn, D., Hobbs, P., Loveridge, F., Glendinning, S., Dijkstra, T. & Hudson, A. (2019). In situ measurements of near-surface hydraulic conductivity in engineered clay slopes. Quarterly Journal of Engineering Geology and Hydrogeology 52(1): 123-135 https://doi.org/10.1144/qjegh2017-059 © Geological Society of London 2018.
You might also like
Towards a predictive model of the shear strength behaviour of fibre reinforced clay
Effects of fibre additions on the tensile strength and crack behaviour of unsaturated clay
Cross-linking of biopolymers for stabilising earthen construction materials
Weather-driven deterioration processes affecting the performance of embankment slopes