Skip to main content

Research Repository

Advanced Search

Non-cuttable material created through local resonance and strain rate effects

Szyniszewski, Stefan; Vogel, Rene; Bittner, Florian; Jakubczyk, Ewa; Anderson, Miranda; Pelacci, Manuel; Chinedu, Ajoku; Endres, Hans-Josef; Hipke, Thomas

Non-cuttable material created through local resonance and strain rate effects Thumbnail


Authors

Rene Vogel

Florian Bittner

Ewa Jakubczyk

Miranda Anderson

Manuel Pelacci

Ajoku Chinedu

Hans-Josef Endres

Thomas Hipke



Abstract

We have created a new architected material, which is both highly deformable and ultra‐resistant to dynamic point loads. The bio-inspired metallic cellular structure (with an internal grid of large ceramic segments) is non-cuttable by an angle grinder and a power drill, and it has only 15% steel density. Our architecture derives its extreme hardness from the local resonance between the embedded ceramics in a flexible cellular matrix and the attacking tool, which produces high-frequency vibrations at the interface. The incomplete consolidation of the ceramic grains during the manufacturing also promoted fragmentation of the ceramic spheres into micron-size particulate matter, which provided an abrasive interface with increasing resistance at higher loading rates. The contrast between the ceramic segments and cellular material was also effective against a waterjet cutter because the convex geometry of the ceramic spheres widened the waterjet and reduced its velocity by two orders of magnitude. Shifting the design paradigm from static resistance to dynamic interactions between the material phases and the applied load could inspire novel, metamorphic materials with pre-programmed mechanisms across different length scales.

Citation

Szyniszewski, S., Vogel, R., Bittner, F., Jakubczyk, E., Anderson, M., Pelacci, M., …Hipke, T. (2020). Non-cuttable material created through local resonance and strain rate effects. Scientific Reports, 10, Article 11539. https://doi.org/10.1038/s41598-020-65976-0

Journal Article Type Article
Acceptance Date May 12, 2020
Online Publication Date Jul 20, 2020
Publication Date 2020
Deposit Date Jul 20, 2020
Publicly Available Date Jul 21, 2020
Journal Scientific Reports
Publisher Nature Research
Peer Reviewed Peer Reviewed
Volume 10
Article Number 11539
DOI https://doi.org/10.1038/s41598-020-65976-0

Files


Published Journal Article (9.7 Mb)
PDF

Publisher Licence URL
http://creativecommons.org/licenses/by/4.0/

Copyright Statement
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.




You might also like



Downloadable Citations