Outputs (1330)

Internal Flows and Particle Transport Inside Picoliter Droplets of Binary Solvent Mixtures (2013)
Presentation / Conference Contribution
Talbot, E., Berson, A., Yang, L., & Bain, C. (2013). Internal Flows and Particle Transport Inside Picoliter Droplets of Binary Solvent Mixtures.

The flows in evaporating droplets of binary mixtures are much more complicated than single solvent systems. Solutal Marangoni flows are generated due to differential evaporation of components. High-speed imaging techniques are used to visualize how i... Read More about Internal Flows and Particle Transport Inside Picoliter Droplets of Binary Solvent Mixtures.

Modelling allosteric signalling in protein homodimers (2011)
Presentation / Conference Contribution
Rodgers, T., Burnell, D., Wilson, M. R., Pohl, E., Cann, M., Townsend, P. D., …Toncrova, H. (2011). Modelling allosteric signalling in protein homodimers. . https://doi.org/10.1007/s00249-011-0734-z

Allostery in protein systems is a thermodynamic phenomenon. Allosteric response is driven by the free energy differences obtained in different binding events, which, in principle, contain contributions from both enthalpic and entropic changes. While... Read More about Modelling allosteric signalling in protein homodimers.

Biotribology of 40mm Diameter MOTIS PEEK on Ceramic Hip Joints: A Detailed Simulator Study with Different Inclination Angles (2011)
Presentation / Conference Contribution
Wang, Q., Wu, J., Simpson, D., Collins, S., Briscoe, B., & Jarman-Smith, M. (2011). Biotribology of 40mm Diameter MOTIS PEEK on Ceramic Hip Joints: A Detailed Simulator Study with Different Inclination Angles. In Proceedings of the 24th Annual Congress of ISTA. concert Building, Bruges (Brugge), Belgium, europe 20-23 September, 2011

Numerical Prediction on Mechanical Contacts Vanguard Knee Joint replacements Tested in the Displacement-Controlled Prosim Simulator (2009)
Presentation / Conference Contribution
Wang, Q., & Wu, J. (2009). Numerical Prediction on Mechanical Contacts Vanguard Knee Joint replacements Tested in the Displacement-Controlled Prosim Simulator. In Proceedings of IMeChE Knee Arthroplasty: From Early Intervention to Revision, Lincoln's Inn Fields, London, 30 April 2009 - 02 May 2009 (289-292)

Exploring the mechanical environments in total knee replacements (TKR) has been indentified to be useful to understand the early failure of the prostheses. The severe damages observed on the retrieved polyethylene tibial component implicate that the... Read More about Numerical Prediction on Mechanical Contacts Vanguard Knee Joint replacements Tested in the Displacement-Controlled Prosim Simulator.

Biotribological and Structural Characterisations of Total Knee Replacements: A Prosim Knee Simulator Study. (2009)
Presentation / Conference Contribution
Wu, J. J., Stanley, M., & Khan, I. (2009). Biotribological and Structural Characterisations of Total Knee Replacements: A Prosim Knee Simulator Study. In Proceedings of IMeChE Knee Arthroplasty: From Early Intervention to Revision (89-94)

Wear friction and surface analysis of 38mm ceramic-on-metal total hip replacements. (2008)
Presentation / Conference Contribution
Williams, S., Wu, J., Unsworth, A., & Khan, I. (2008). Wear friction and surface analysis of 38mm ceramic-on-metal total hip replacements. In Proceedings of the 21st Annual Congress of the International Society of Technology in Arthroplasty

Well defined multi end-functionalized polymers as additives to modify surfaces and interfaces (2006)
Presentation / Conference Contribution
Hutchings, L., Narrainen, A., Clarke, N., Thompson, R., & Ansari, I. (2006). Well defined multi end-functionalized polymers as additives to modify surfaces and interfaces. In Abstracts of Papers of the American Chemical Society

In situ vibrational spectroscopy of thin organic films confined at the solid-solid interface (2006)
Presentation / Conference Contribution
Winget, S., Bain, C., & Beattie, D. (2006). In situ vibrational spectroscopy of thin organic films confined at the solid-solid interface. In Abstracts of Papers of the American Chemical Society

Interaction of peptides and proteins with planar supported lipid bilayers studied by Raman scattering (2006)
Presentation / Conference Contribution
Bain, C., Lee, C., Smith, R., & Wacklin, H. (2006). Interaction of peptides and proteins with planar supported lipid bilayers studied by Raman scattering. In Abstracts of Papers of the American Chemical Society

Bovine Lens Capsule-derived 3D matrices: Significance to the Maintenance of Lens Epthelial Cell Phenotype in in vitro Culture Models (2008)
Presentation / Conference Contribution
Tholozan, F., Goldberg, M., Przyborski, S., Wu, J., & Quinlan, R. (2008). Bovine Lens Capsule-derived 3D matrices: Significance to the Maintenance of Lens Epthelial Cell Phenotype in in vitro Culture Models. In ARVO 2008 Annual Meeting Eyes on Innovation

Fluorocarbon end-functionalized polymers from poly(arylether) dendritic initiators (2006)
Presentation / Conference Contribution
Narrainen, A., Hutchings, L., Feast, W., Thompson, R., Ansari, I., & Clarke, N. (2006). Fluorocarbon end-functionalized polymers from poly(arylether) dendritic initiators. In Macromolecular Symposia (103-109)

Deformation modelling of glassy polymers incorporating structural change (2002)
Presentation / Conference Contribution
Wu, J., & Buckley, C. (2002). Deformation modelling of glassy polymers incorporating structural change.

The role of molecular parameters in the plastic deformation of glassy polystyrene (2003)
Presentation / Conference Contribution
Wu, J., & Buckley, C. (2003). The role of molecular parameters in the plastic deformation of glassy polystyrene. In 12th International Conference on Deformation Yield and Fracture of Polymers: 7 - 10 April 2003, Churchill College, Cambridge, UK

Interparticle Bonding in Ultra-high Molecular Weight Polyethylene and its Control via Process Parameters (2000)
Presentation / Conference Contribution
Wu, J., Buckley, C., & O'Connor, J. (2000). Interparticle Bonding in Ultra-high Molecular Weight Polyethylene and its Control via Process Parameters. In A. Duckett (Ed.), Proceedings of 11th International Conference on Deformation Yield and Fracture of Polymers: 10-13 April 2000, Cambridge, UK

Anisotropic plastic deformation of glassy polymers with process-induced molecular orientation (2003)
Presentation / Conference Contribution
Buckley, C., & Wu, J. (2003). Anisotropic plastic deformation of glassy polymers with process-induced molecular orientation.

The constitutive modelling of glassy thermoplastics is extended to the case of anisotropy arising from processinduced molecular orientation. The basis of the work is the Glass-Rubber model framework, known to capture well the constitutive response of... Read More about Anisotropic plastic deformation of glassy polymers with process-induced molecular orientation.

Multimorbidity due to novel pathogenic variants in theWFS1/RP1/NOD2genes: autosomal dominant congenital lamellar cataract, retinitis pigmentosa and Crohn’s disease in a British family (2023)
Journal Article
Berry, V., Ionides, A., Georgiou, M., Quinlan, R. A., & Michaelides, M. (2023). Multimorbidity due to novel pathogenic variants in theWFS1/RP1/NOD2genes: autosomal dominant congenital lamellar cataract, retinitis pigmentosa and Crohn’s disease in a British family. BMJ Open Ophthalmology, 8(1), Article e001252. https://doi.org/10.1136/bmjophth-2023-001252

Background A five generation family has been analysed by whole exome sequencing (WES) for genetic associations with the multimorbidities of congenital cataract (CC), retinitis pigmentosa (RP) and Crohn’s disease (CD). Methods WES was performed for un... Read More about Multimorbidity due to novel pathogenic variants in theWFS1/RP1/NOD2genes: autosomal dominant congenital lamellar cataract, retinitis pigmentosa and Crohn’s disease in a British family.

Shear thinning and brittle failure in crystal-bearing magmas arise from local non-Newtonian effects in the melt (2023)
Journal Article
Vasseur, J., Wadsworth, F. B., & Dingwell, D. B. (2023). Shear thinning and brittle failure in crystal-bearing magmas arise from local non-Newtonian effects in the melt. Earth and Planetary Science Letters, 603, Article 117988. https://doi.org/10.1016/j.epsl.2023.117988

Crystal-bearing magmas are often assumed to be intrinsically non-Newtonian, but the mechanism underlying suspension shear thinning remains unconstrained. Here, we test the hypothesis that shear thinning in these suspensions arises solely from unrelax... Read More about Shear thinning and brittle failure in crystal-bearing magmas arise from local non-Newtonian effects in the melt.

Dual networks: how does knowledge network embeddedness affect firms' supply chain learning? (2023)
Journal Article
Yan, J., Yu, Z., Fernandes, K., & Xiong, Y. (2023). Dual networks: how does knowledge network embeddedness affect firms' supply chain learning?. International Journal of Operations & Production Management, 43(8), 1277-1303. https://doi.org/10.1108/ijopm-08-2022-0507

Purpose: To explore the mechanism that shapes firms' supply chain learning (SCL) practices, this study examines the relationship between firms' knowledge network embeddedness and their SCL practice in a supply chain network, as well as the moderating... Read More about Dual networks: how does knowledge network embeddedness affect firms' supply chain learning?.

Metal-based gels: Synthesis, properties, and applications (2023)
Journal Article
Picci, G., Caltagirone, C., Garau, A., Lippolis, V., Milia, J., & Steed, J. W. (2023). Metal-based gels: Synthesis, properties, and applications. Coordination Chemistry Reviews, 492, https://doi.org/10.1016/j.ccr.2023.215225

This review covers various aspects of recent developments on the design, the synthesis, the characterization of gels that: (i) are formed in the presence of metal ions (metallogels); (ii) are based on coordination complexes as gelators. Particular at... Read More about Metal-based gels: Synthesis, properties, and applications.

Bubble Formation in Magma (2023)
Journal Article
Gardner, J. E., Wadsworth, F. B., Carley, T. L., Llewellin, E. W., Kusumaatmaja, H., & Sahagian, D. (2023). Bubble Formation in Magma. Annual Review of Earth and Planetary Sciences, 51(1), 131-154. https://doi.org/10.1146/annurev-earth-031621-080308

Volcanic eruptions are driven by bubbles that form when volatile species exsolve from magma. The conditions under which bubbles form depend mainly on magma composition, volatile concentration, presence of crystals, and magma decompression rate. These... Read More about Bubble Formation in Magma.