Dual polarity multi-level boost DC-DC converter
(2024)
Presentation / Conference Contribution
Blackhorse-Hull, D., Mohanan-Leela, P., Alsafrani, A., Sarma, N., Crabtree, C., & Horsfall, A. (2024, June). Dual polarity multi-level boost DC-DC converter. Presented at 13th International Conference on Power Electronics, Machines and Drives (PEMD 2024), Nottingham, UK
Dr Nur Sarma's Outputs (15)
Power Quality Investigation of a Grid-Connected Single-Phase Bidirectional AC/DC for Electric Vehicle Applications (2024)
Presentation / Conference Contribution
Genc, S., Gezegin, C., Ozgonenel, O., Akpinar, K. N., Gundogdu, B., & Sarma, N. (2024, May). Power Quality Investigation of a Grid-Connected Single-Phase Bidirectional AC/DC for Electric Vehicle Applications. Presented at 2024 12th International Conference on Smart Grid (icSmartGrid), Setubal, PortugalThe number of electric vehicles (EVs) is growing rapidly in almost all countries, and as a result, the power consumption to charge EVs is also sharply increasing. The characteristics of EV charging are extremely variable, which creates negative impac... Read More about Power Quality Investigation of a Grid-Connected Single-Phase Bidirectional AC/DC for Electric Vehicle Applications.
Suppression of Conducted Emissions in Three-Phase Adjustable Drive Systems (2023)
Presentation / Conference Contribution
Genc, S., Sarma, N., Gundogdu, B., Ozgonenel, O., Gezegin, C., & Terzi, U. K. (2023, November). Suppression of Conducted Emissions in Three-Phase Adjustable Drive Systems. Presented at 2023 14th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, TurkiyeThe fundamental issue with high switching power converters is electromagnetic interference. The converter design must be electromagnetically compliant for an operation to be secure. Filters play a crucial role in mitigating electromagnetic interferen... Read More about Suppression of Conducted Emissions in Three-Phase Adjustable Drive Systems.
Model Predictive Controlled Application of Power Management Algorithm for Battery Energy Storage System Providing Frequency Ancillary Service (2023)
Presentation / Conference Contribution
Akpinar, K. N., Sarma, N., Gundogdu, B., & Ozgonenel, O. (2023, November). Model Predictive Controlled Application of Power Management Algorithm for Battery Energy Storage System Providing Frequency Ancillary Service. Presented at 2023 14th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, TurkiyeThe active power that must be provided in accordance with frequency ancillary service regulations when battery energy storage systems participate in the frequency ancillary service is modelled in this study using a Model Predicted Controlled (MPC) 2-... Read More about Model Predictive Controlled Application of Power Management Algorithm for Battery Energy Storage System Providing Frequency Ancillary Service.
Investigation of Doubly-fed Induction Generator Controller Signals under Variable Speed Operating Conditions (2022)
Presentation / Conference Contribution
Sarma, N. (2022, September). Investigation of Doubly-fed Induction Generator Controller Signals under Variable Speed Operating Conditions. Presented at 2022 11th International Conference on Renewable Energy Research and Application (ICRERA), Istanbul, TurkeyThe analysis of the controller signals of a doublyfed induction generator under variable speed operating conditions with and without generator faults is presented in the time domain in order to more accurately investigate the conditions presently exp... Read More about Investigation of Doubly-fed Induction Generator Controller Signals under Variable Speed Operating Conditions.
DFIG current and controller signals’ angular shaft misalignment signature’an experimental case study (2020)
Presentation / Conference Contribution
Wang, Y., Sarma, N., Mohammed, A., & Djurovic, S. (2020, December). DFIG current and controller signals’ angular shaft misalignment signature’an experimental case study. Presented at 2020 International Conference on Electrical Machines (ICEM), Gothenburg, Sweden
Modeling of a Typical Photovoltaic Module using Matlab/Simulink (2018)
Presentation / Conference Contribution
Sarma, N., Gegin, K., Simsir, M., & Tutkun, N. (2018, December). Modeling of a Typical Photovoltaic Module using Matlab/Simulink. Presented at 2018 2nd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), 2018 2nd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT)
Comparison of Typical PV Module Performances Based on the Circuit Models (2018)
Presentation / Conference Contribution
Tutkun, N., Gegin, K., Sarma, N., & Salam, Z. (2018, December). Comparison of Typical PV Module Performances Based on the Circuit Models. Presented at 2018 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), Kota Kinabalu, Malaysia
Investigation of grid supply harmonic effects in wound rotor induction machines (2018)
Presentation / Conference Contribution
Sarma, N., & Tuohy, P. (2018, December). Investigation of grid supply harmonic effects in wound rotor induction machines. Presented at 2018 5th International Conference on Electrical and Electronic Engineering (ICEEE), Istanbul, Turkey
Fibre optic monitoring of induction machine frame strain as a diagnostic tool (2017)
Presentation / Conference Contribution
Mohammed, A., Sarma, N., & Djurovic, S. (2017, December). Fibre optic monitoring of induction machine frame strain as a diagnostic tool. Presented at 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA
Implementation of a conventional DFIG stator flux oriented control scheme using industrial converters (2016)
Presentation / Conference Contribution
Sarma, N., Apsley, J., & Djurovic, S. (2016, December). Implementation of a conventional DFIG stator flux oriented control scheme using industrial converters. Presented at 2016 IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Birmingham, UK
Analysis of a wound rotor induction machine low frequency vibroacoustic emissions under stator winding fault conditions (2016)
Presentation / Conference Contribution
Sarma, N., Li, Q., Djurovic, S., Smith, A., & Rowland, S. (2016, December). Analysis of a wound rotor induction machine low frequency vibroacoustic emissions under stator winding fault conditions. Presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), 10.1049/cp.2016.0335
An experimental study of winding fault induced slot harmonic effects in the cage rotor induction machine stator current (2016)
Presentation / Conference Contribution
Sarma, N., Mohammed, A., Melecio, J., Tshiloz, K., & Djurovic, S. (2016, December). An experimental study of winding fault induced slot harmonic effects in the cage rotor induction machine stator current. Presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glaskow, UK
On wound rotor induction machine rotor electrical unbalance recognition using stator frame vibration spectral analysis (2016)
Presentation / Conference Contribution
Vilchis-Rodriguez, D., Djurovic, S., Sarma, N., Tshiloz, K., Smith, A., & Wei, Y. (2016, December). On wound rotor induction machine rotor electrical unbalance recognition using stator frame vibration spectral analysis. Presented at 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Glaskow, UK
Modelling of induction machine time and space harmonic effects in the SIMULINK environment (2015)
Presentation / Conference Contribution
Sarma, N., Tshiloz, K., Vilchis-Rodriguez, D., & Djurovic, S. (2015, December). Modelling of induction machine time and space harmonic effects in the SIMULINK environment. Presented at 2015 IEEE International Electric Machines & Drives Conference (IEMDC), Coeur d'Alene, ID, USA