H. Polinder
Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines
Polinder, H.; van der Pijl, F.F.A.; de Vilder, G-J.; Tavner, P.J.
Authors
F.F.A. van der Pijl
G-J. de Vilder
P.J. Tavner
Abstract
The objective of this paper is to compare five different generator systems for wind turbines, namely the doubly-fed induction generator with three-stage gearbox (DFIG3G), the direct-drive synchronous generator with electrical excitation (DDSG), the direct-drive permanent-megnet generator (DDPMG), the permanent-magnet generator with single stage gearbox (PMG1G), and the doubly-fed induction generator with single-stage gearbox (DFIG1G). The comparison is based on cost and annual energy yield for a given wind climate. The DFIG3G is a cheap solution using standard components. The DFIG1G seems the most attractive in terms of energy yield divided by cost. The DDPMG has the highest energy yield, but although it is cheaper than the DDSG, it is more expensive than the generator systems with gearbox.
Citation
Polinder, H., van der Pijl, F., de Vilder, G., & Tavner, P. (2006). Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines. IEEE Transactions on Energy Conversion, 21(3), 725-733. https://doi.org/10.1109/tec.2006.875476
Journal Article Type | Article |
---|---|
Publication Date | Aug 1, 2006 |
Deposit Date | Apr 12, 2010 |
Publicly Available Date | Apr 13, 2010 |
Journal | IEEE Transactions on Energy Conversion |
Print ISSN | 0885-8969 |
Publisher | Institute of Electrical and Electronics Engineers |
Peer Reviewed | Peer Reviewed |
Volume | 21 |
Issue | 3 |
Pages | 725-733 |
DOI | https://doi.org/10.1109/tec.2006.875476 |
Keywords | Direct-drive, Doubly fed induction generator (DFIG), Permanent-magnet generator, Single-stage gearbox, Synchronous generator, Wind turbine. |
Public URL | https://durham-repository.worktribe.com/output/1553341 |
Files
Published Journal Article
(522 Kb)
PDF
Copyright Statement
©2006 IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder
Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
You might also like
Lessening gap loss concentration problems in nanocrystalline cores by alloy gap replacement
(2022)
Journal Article
Integrated condition-based maintenance modelling and optimisation for offshore wind farms
(2021)
Journal Article
Reliability and condition monitoring
(2016)
Book Chapter