Dr Zhiwei Ma zhiwei.ma@durham.ac.uk
Associate Professor
Dr Zhiwei Ma zhiwei.ma@durham.ac.uk
Associate Professor
Dr Huashan Bao huashan.bao@durham.ac.uk
Associate Professor
Professor Tony Roskilly anthony.p.roskilly@durham.ac.uk
Professor
The present paper aimed at exploring absorption heat transformer (AHT) to upgrade ultralow grade waste heat in the temperature range of 40–60 °C. The performance of AHTs with different configurations, including single stage, double stage and double effect, were numerically analysed and compared in terms of temperature lift, coefficient of performance (COP) and exergy coefficient of performance (COPe). The most influential and crucial factor for the studied AHTs is the recirculation flow ratio (FR), the increase of which results in an increasing temperature lift but gradually declining COP. The COPe can achieve its maximum value with a certain FR, and such a state can be considered as the optimal working condition. Within the studied waste heat temperature range, the optimal FR in single stage AHT is in the range of 10–12, at which the system can deliver 17.1~34.7 °C temperature lift with COP at 0.471~0.475. The best configuration amid the studied four different double stage AHTs has a temperature lifting capacity of 31.8~68.6 °C with a COP around 0.30. The double effect AHT compromises its temperature lifting capacity for the highest COP among all the AHTs studied, which can reach about 0.65 though necessitates relatively higher waste heat temperature and higher strong solution concentration to drive the cycle; the double effect AHT is not recommended for the upgrading of ultralow grade waste heat.
Ma, Z., Bao, H., & Roskilly, A. P. (2016). Performance analysis of ultralow grade waste heat upgrade using absorption heat transformer. Applied Thermal Engineering, 101, 350-361. https://doi.org/10.1016/j.applthermaleng.2016.02.002
Journal Article Type | Article |
---|---|
Acceptance Date | Feb 1, 2016 |
Online Publication Date | Mar 15, 2016 |
Publication Date | 2016-05 |
Deposit Date | Oct 11, 2019 |
Journal | Applied Thermal Engineering |
Print ISSN | 1359-4311 |
Electronic ISSN | 1873-5606 |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 101 |
Pages | 350-361 |
DOI | https://doi.org/10.1016/j.applthermaleng.2016.02.002 |
Public URL | https://durham-repository.worktribe.com/output/1318219 |
About Durham Research Online (DRO)
Administrator e-mail: dro.admin@durham.ac.uk
This application uses the following open-source libraries:
Apache License Version 2.0 (http://www.apache.org/licenses/)
Apache License Version 2.0 (http://www.apache.org/licenses/)
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2025
Advanced Search