Skip to main content

Research Repository

Advanced Search

Outputs (12)

Design and simulation of InP and silicon nanowires with different channel characteristic as biosensors to improve output sensitivity (2022)
Journal Article
Mohammadnejad, S., Tahi, I., & Nouri Rezaie, M. (2022). Design and simulation of InP and silicon nanowires with different channel characteristic as biosensors to improve output sensitivity. Optical and Quantum Electronics, 54(2), https://doi.org/10.1007/s11082-021-03499-2

This research contains a comparison among technologies of SiNW-FET/InPNW-FET depending on the size of channel and dopants in channel for biosensing application for two types of silicon and InP materials in the nanowire channel. A device numerical mod... Read More about Design and simulation of InP and silicon nanowires with different channel characteristic as biosensors to improve output sensitivity.

The impact of ZnO nanotube on the performance of hybrid inorganic/organic light-emitting diode as a single-mode ring-core UV waveguide (2021)
Journal Article
Rezaie, M. N., Mohammadnejad, S., & Ahadzadeh, S. (2022). The impact of ZnO nanotube on the performance of hybrid inorganic/organic light-emitting diode as a single-mode ring-core UV waveguide. Surfaces and Interfaces, 28, Article 101666. https://doi.org/10.1016/j.surfin.2021.101666

After a systematic survey in hybrid inorganic/organic light-emitting heterostructure devices based on ZnO in the last decay, in this novel work, the impact of the single-mode ring-core waveguide based on ZnO nanotube (NT)/MEH-PPV for ultraviolet orga... Read More about The impact of ZnO nanotube on the performance of hybrid inorganic/organic light-emitting diode as a single-mode ring-core UV waveguide.

Effect of ZnO nanorods and nanotubes on the electrical and optical characteristics of organic and perovskite light-emitting diodes (2021)
Journal Article
Mohammadnejad, S., Ahadzadeh, S., & Nouri Rezaie, M. (2021). Effect of ZnO nanorods and nanotubes on the electrical and optical characteristics of organic and perovskite light-emitting diodes. Nanotechnology, 32(24), Article 245204. https://doi.org/10.1088/1361-6528/abe893

Due to their suitable electrical and optical properties, ZnO nanostructure-based organic light-emitting diodes (LEDs) and perovskite LEDs can be utilized in the optoelectronics industry. A combination of ZnO nanorods and nanotubes with various types... Read More about Effect of ZnO nanorods and nanotubes on the electrical and optical characteristics of organic and perovskite light-emitting diodes.

Hybrid inorganic-organic light-emitting heterostructure devices based on ZnO (2021)
Journal Article
Rezaie, M. N., Mohammadnejad, S., & Ahadzadeh, S. (2021). Hybrid inorganic-organic light-emitting heterostructure devices based on ZnO. Optics and Laser Technology, 138, Article 106896. https://doi.org/10.1016/j.optlastec.2020.106896

Future lighting technologies and the optoelectronic industry are dependent on novel electroluminescent devices. The hybrid inorganic/organic light-emitting diodes (I/O LEDs) have become popular to obtain high-quality displays and cost-efficient flexi... Read More about Hybrid inorganic-organic light-emitting heterostructure devices based on ZnO.

Effect of the PEDOT:PSS buffer layer on the performance of hybrid ZnO nanorods/polymer electroluminescent diode (2020)
Journal Article
Rezaie, M. N., & Mohammadnejad, S. (2020). Effect of the PEDOT:PSS buffer layer on the performance of hybrid ZnO nanorods/polymer electroluminescent diode. Optical and Quantum Electronics, 52(2), Article 115. https://doi.org/10.1007/s11082-020-2244-7

Hybrid ZnO nanorods/polymer light-emitting diodes have excited much attraction because of the combination of high optoelectronic properties of ZnO nanorod with the variety and processability of polymers. In this research, the hybrid ZnO nanorods/poly... Read More about Effect of the PEDOT:PSS buffer layer on the performance of hybrid ZnO nanorods/polymer electroluminescent diode.

Analysis and atomic simulation of electron structures and defects in ZnO nano-crystal for its optimal doping with Al (2017)
Presentation / Conference Contribution
Mohammadnejad, S., & Rezaie, M. N. (2017, December). Analysis and atomic simulation of electron structures and defects in ZnO nano-crystal for its optimal doping with Al. Presented at 2017 IEEE 4th International Conference on Knowledge-Based Engineering and Innovation (KBEI), Tehran, Iran

Electrical and structural properties of zinc oxide (ZnO) unit cell and aluminum doped ZnO (AZO) super cell have been studied using density functional theory (DFT) and SIESTA package. According to the calculation of the formation energies for vacancy... Read More about Analysis and atomic simulation of electron structures and defects in ZnO nano-crystal for its optimal doping with Al.

Effect of seed layers on low-temperature, chemical bath deposited ZnO nanorods-based near UV-OLED performance (2017)
Journal Article
Rezaie, M. N., Manavizadeh, N., Nayeri, F. D., Bidgoli, M. M., Nadimi, E., & Boroumand, F. A. (2018). Effect of seed layers on low-temperature, chemical bath deposited ZnO nanorods-based near UV-OLED performance. Ceramics International, 44(5), 4937-4945. https://doi.org/10.1016/j.ceramint.2017.12.086

Low-temperature wet chemical bath deposition (CBD) method is one of the most efficient and least hazardous solution-based techniques which is widely employed to grow ZnO NRs. In CBD method, a seed layer is usually deposited on the substrate. In this... Read More about Effect of seed layers on low-temperature, chemical bath deposited ZnO nanorods-based near UV-OLED performance.

Quality enhancement of AZO thin films at various thicknesses by introducing ITO buffer layer (2017)
Journal Article
Rezaie, M. N., Manavizadeh, N., Nadimi, E., & Boroumand, F. A. (2017). Quality enhancement of AZO thin films at various thicknesses by introducing ITO buffer layer. Journal of Materials Science: Materials in Electronics, 28(13), 9328-9337. https://doi.org/10.1007/s10854-017-6671-6

Due to the simultaneously superior optical transmittance and low electrical resistivity, transparent conductive electrodes play a significant role in semiconductor electronics. To enhance the electrical properties of these films, one approach is thic... Read More about Quality enhancement of AZO thin films at various thicknesses by introducing ITO buffer layer.

Comparison study of transparent RF-sputtered ITO/AZO and ITO/ZnO bilayers for near UV-OLED applications (2016)
Journal Article
Rezaie, M. N., Manavizadeh, N., Abadi, E. M. N., Nadimi, E., & Boroumand, F. A. (2017). Comparison study of transparent RF-sputtered ITO/AZO and ITO/ZnO bilayers for near UV-OLED applications. Applied Surface Science, 392, 549-556. https://doi.org/10.1016/j.apsusc.2016.09.080

Hybrid inorganic/organic light-emitting diodes have attracted much attention in the field of luminescent electronics due to the desired incorporation of high optoelectronic features of inorganic materials with the processability and variety of organi... Read More about Comparison study of transparent RF-sputtered ITO/AZO and ITO/ZnO bilayers for near UV-OLED applications.