Effect of Cement Type on the Mechanical Behavior of a Gravelly Sand.
(2006)
Journal Article
Haeri, S., Hamidi, A., Hosseini, S., Asghari, E., & Toll, D. (2006). Effect of Cement Type on the Mechanical Behavior of a Gravelly Sand. Geotechnical and Geological Engineering, 24(2), 335-360. https://doi.org/10.1007/s10706-004-7793-1
All Outputs (59)
The effects of proteins on the friction and lubrication of artificial joints. (2006)
Journal Article
Scholes, S., & Unsworth, A. (2006). The effects of proteins on the friction and lubrication of artificial joints. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220(H6), 687-693
The Development of a Knowledge-Based System for the Preliminary Investigation of Contaminated Land. (2006)
Journal Article
Martin, J., & Toll, D. (2006). The Development of a Knowledge-Based System for the Preliminary Investigation of Contaminated Land. Computers and Geotechnics, 33(2), 93-100. https://doi.org/10.1016/j.compgeo.2006.03.002
Disscussion on Simple plasticity-based prediction of the undrained settlement of shallow foundations on clay, Authors' reply. Geotechnique 55, No 6.,435-477 (2006)
Journal Article
Osman, A., & Bolton, M. (2006). Disscussion on Simple plasticity-based prediction of the undrained settlement of shallow foundations on clay, Authors' reply. Geotechnique 55, No 6.,435-477. Géotechnique, 56(5), 355-356
Development of a Metal Selector System (2006)
Journal Article
Wang, Q., & Scott, A. (2006). Development of a Metal Selector System. International Journal of Advanced Manufacturing Technology, 32(9-10), 843-855. https://doi.org/10.1007/s00170-005-0401-6There are an increasing number of different material types currently available for a number of industrial applications. A designer must not only have the ability to decide upon a suitable material for a specific product but also be able to optimise t... Read More about Development of a Metal Selector System.
Inkjet-printed polymer films for the detection of organic vapors (2006)
Journal Article
Mabrook, M., Pearson, C., & Petty, M. (2006). Inkjet-printed polymer films for the detection of organic vapors. IEEE Sensors Journal, 6(6), 1435-1444
An improvement on Hvorslev's shape factors (2006)
Journal Article
Mathias, S., & Butler, A. (2006). An improvement on Hvorslev's shape factors. Géotechnique, 56(10), 705-706. https://doi.org/10.1680/geot.2006.56.10.705
Design of braced excavations to limit ground movements (2006)
Journal Article
Osman, A., & Bolton, M. (2006). Design of braced excavations to limit ground movements. Geotechnical Engineering, 159(GE3), 167-175. https://doi.org/10.1680/geng.2006.159.3.167
Foundations of an Agile Design Methodology (2006)
Journal Article
Matthews, P., Lomas, C., Armoutis, N., & Maropoulos, P. (2006). Foundations of an Agile Design Methodology. International journal of agile manufacturing, 9(1), 29-38Modern design projects typically are undertaken concurrently in a virtual enterprise network of expert design and manufacturing agents. The general need for agile response in turbulent environments is well documented and has been analysed at the manu... Read More about Foundations of an Agile Design Methodology.
Implementing the Information Pump using Accessible Technology (2006)
Journal Article
Matthews, P., & Chesters, P. (2006). Implementing the Information Pump using Accessible Technology. Journal of Engineering Design, 17(6), 563-585. https://doi.org/10.1080/09544820600646629The Information Pump (IP) is a method for extracting high quality subjective product information from a small group of subjects. The method is based around a game environment where the subjects are awarded points for the information they supply. This... Read More about Implementing the Information Pump using Accessible Technology.
Highly tunable, high-throughput nanolithography based on strained regioregular conducting polymer films. (2006)
Journal Article
Jones, A. G., Balocco, C., King, R., & Song, A. M. (2006). Highly tunable, high-throughput nanolithography based on strained regioregular conducting polymer films. Applied Physics Letters, 89(1), https://doi.org/10.1063/1.2219094
Influence of processing conditions on the stability of poly(3-hexylthiophene)-based field-effect transistors. (2006)
Journal Article
Majewski, L., Kingsley, J., Balocco, C., & Song, A. (2006). Influence of processing conditions on the stability of poly(3-hexylthiophene)-based field-effect transistors. Applied Physics Letters, 88(22), https://doi.org/10.1063/1.2208938
Non-destructive patterning of conducting-polymer devices using subtractive photolithography. (2006)
Journal Article
Balocco, C., Majewski, L., & Song, A. (2006). Non-destructive patterning of conducting-polymer devices using subtractive photolithography. Organic Electronics, 7(6), 500 - 507
Biomass co-firing in a pressurized fluidized bed combustion (PFBC) combined cycle power plant: A techno-environmental assessment based on computational simulations (2006)
Journal Article
Huang, Y., McIlveen-Wright, D., Rezvani, S., Wang, Y., Hewitt, N., & Williams, B. (2006). Biomass co-firing in a pressurized fluidized bed combustion (PFBC) combined cycle power plant: A techno-environmental assessment based on computational simulations. Fuel Processing Technology, 87(10), 927-934. https://doi.org/10.1016/j.fuproc.2006.07.003
Scanning probe microscope based nanolithography on conducting polymer films. (2006)
Journal Article
Balocco, C., Jones, A., Kingsley, J., Chan, J., Huang, X., & Song, A. (2006). Scanning probe microscope based nanolithography on conducting polymer films
Turbulent and Stable/Unstable Laminar Burning Velocity Measurements from Outwardly Propagating Spherical Hydrogen-Air Flames at Elevated Pressures (2006)
Journal Article
Smallbone, A., Tsuneyoshi, K., & Kitagawa, T. (2006). Turbulent and Stable/Unstable Laminar Burning Velocity Measurements from Outwardly Propagating Spherical Hydrogen-Air Flames at Elevated Pressures. https://doi.org/10.1299/jtst.1.31
Comparative in vitro wear testing of PEEK and UHMWPE capped metacarpophalangeal prostheses. (2006)
Journal Article
Joyce, T., Rieker, C., & Unsworth, A. (2006). Comparative in vitro wear testing of PEEK and UHMWPE capped metacarpophalangeal prostheses. Bio-Medical Materials and Engineering, 16(1), 1-10
Compliant layer acetabular cups: friction testing of a range of materials and designs for a new generation of prosthesis which mimics the natural joint (2006)
Journal Article
Scholes, S., Burgess, I., Marsden, H., Unsworth, A., Jones, E., & Smith, N. (2006). Compliant layer acetabular cups: friction testing of a range of materials and designs for a new generation of prosthesis which mimics the natural joint. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220(5), 583-596. https://doi.org/10.1243/09544119h06404Total joint replacements (TJRs) have a limited lifetime, but the introduction of components that exhibit good lubricating properties with low friction and low wear could extend the life of TJRs. A novel acetabular cup design using polyurethane (PU) a... Read More about Compliant layer acetabular cups: friction testing of a range of materials and designs for a new generation of prosthesis which mimics the natural joint.
Interaction of impulse immersed fluid jet with barrier (2006)
Journal Article
Veremieiev, S., & Semko, A. (2008). Interaction of impulse immersed fluid jet with barrier. Прикладна гідромеханіка. Prikladna gìdromehanìka, 10(1), 3-9The interaction of the impact flooded jet with tough wall was investigated numerically. Distributions of the velocities and pressure were obtained for normal, model ultra viscosity and low viscosity fluid for different distances to the wall. The fric... Read More about Interaction of impulse immersed fluid jet with barrier.
An element-based displacement preconditioner for linear elasticity problems (2006)
Journal Article
Augarde, C., Ramage, A., & Staudacher, J. (2006). An element-based displacement preconditioner for linear elasticity problems. Computers and Structures, 84(31-32), 2306-2315. https://doi.org/10.1016/j.compstruc.2006.08.057Finite element analysis of problems in structural and geotechnical engineering results in linear systems where the unknowns are displacements and rotations at nodes. Although the solution of these systems can be carried out using either direct or ite... Read More about An element-based displacement preconditioner for linear elasticity problems.